-
A heavy-duty hopper with 12-gauge sides and ends
with 10-gauge conveyor bottom and sills.
-
A conveyor system with heat-treated,
self-cleaning pintle conveyor chain with 3/16" x 3/4"
(MP) or 3/8" x 3/4" (Super P) chain bars
positioned on approximately 5" centers.
-
A 10-1/2 horsepower Briggs & Stratton
industrial/commercial engine with the following in-cab
controls: electric engine throttle for in-cab control of
engine speed and spread width; electric clutch for stopping and
starting conveyor and spinner regardless of engine speed;
starter/alternator for in-cab startup of engine and continued
recharging of battery while in operation.
-
A heavy duty spinner assembly with the following
six material control baffles: two rod-adjustable internal
baffles for positioning material onto the spinner; one
front baffle for protecting the underside of the vehicle;
three rod-adjustable (right, left, and rear) for controlling the
direction and width of spread pattern.
-
Four chains and 5000 lb. rated load binders for
secure installation into pickup truck or onto flatbed truck.
-
Many other options available to help make the MP and Super P work for your specific need.
-
To learn more about the MP and Super P contact Linco
Equipment.
