-
A heavy-duty 10-gauge hopper and stakes with
7-gauge conveyor bottom panel and sills. Unpainted 304 and
painted 409 stainless steel units are made of a 12-gauge hopper
and stakes with 10-gauge conveyor bottom panel and sills.
-
A series-type hydraulic system with an on/off
in-cab switch that provides hydraulic oil to the spinner first
then to the conveyor motor. Conveyor speed is a direct
function of the truck engine RPM and is synchronized with the
ground speed.
-
A 24" wide roller conveyor chain with
3/8" x 1-1/2" cross bars for spreading deicing
materials. The conveyor is driven by a 6:1 reduction spur
gear drive with a 98% efficient hi-torque / low-speed hydraulic
motor.
-
A fully enclosed hydraulic-drive spinner with
two internal deflectors, a 20" diameter spinner disc
including six bolt-on hardened fins and a four-section baffle to
control material application.
-
Many other options available including fenders,
mud flaps, cab shield and screens.
-
Contact Linco
Equipment for more information about the E2020XT.
